WATER CARE

Before you begin: Follow your product labels and the advice from your in-store water test. Wait 30–60 minutes between adding different chemicals. Never fill the spa with softened water.

Initial spa start-up

Six steps from fill to first soak
STEP 01

Fill through the filter area

Remove the filter and place your hose directly into the filter area. Do not use softened water. If you are on a well, a hose pre-filter can help remove metals and calcium deposits.
STEP 02

Heat & prevent scale

Fill to the recommended water line, switch on the GFCI, and begin heating. At 80°F or warmer, add 60 mL Prevent II per 1,000 L.
STEP 03

Test pH & alkalinity

At your desired temperature (102°F recommended), test both with strips. pH Reducer lowers pH and alkalinity; adjust as needed.
STEP 04

If readings are high

Add 2 caps pH Reducer, wait 20 minutes, then add 2 more caps. Wait at least 24 hours before retesting. Double this quantity for swim spas.
STEP 05

Add sanitizer

Hot tub: 2 caps Spa Plus.
Swim spa: 1 cap Chlor-aid.
STEP 06

Bring in a water sample

Visit either Premium Wholesale location for electronic water testing. Our team can help fine-tune your water chemistry.
Space out different chemical additions by 30–60 minutes.

Your care schedule

A quick reference by frequency

After each use / every 3 days

  • Hot tub: add 1–2 caps Spa Plus for 1–3 bathers, or 2–3 caps for 4–6 bathers.
  • Swim spa: use Chlor-aid at 10 g per 1,000 L (one cap holds 85 g).

Once a week

  • Add 100 g Spa Shock per 1,500 L.
  • Add 30 mL Prevent II per 1,000 L.
  • Test pH and alkalinity; adjust as needed.

Every couple of weeks

  • Top up the water level.
  • Rinse filters under a tap or garden hose.

Every 3 months

  • Soak the filter overnight in warm water with filter cleaner; rinse and dry it in the morning.
  • Keep a second filter set for rotation. Do not pressure wash filters.

Every 6 months

  • Drain and refill, repeating the start-up steps.
  • Check filters; replace standard filters every 12 months and Eco Pur filters every 6 months.

Water troubleshooting

Symptoms and first steps

Chlorine odour

Excess chlorine or low pH: shock with Spa Shock and adjust pH as required.

Water odour

Check sanitizer and pH. Bacteria, algae, or phosphates may need further treatment and a water test.

Cloudy water

Clean filters, test and balance water, and consider draining if the water is old.

Eye or skin irritation

Check sanitizer and pH. If chlorine is high, let it drop before entering.

Foaming

Body oils, lotions, or soap may be involved. Check water chemistry and add Spa Shock.

Scum at the waterline

Use Zorbie or Spa Ball to collect oils; gently wipe the line with a damp towel.

Chalky white scale

High calcium levels can cause deposits. Add Prevent II.
Avoid continuous use of Tri-Chlor tablets: the attached guide warns they can damage your spa and void its warranty.

Other water care issues

Products mentioned in the 2026 guide

Low pH / alkalinity

Use pH Booster for low pH and Alka Rise for low alkalinity.

Water clarity

Use Spa Clear, scoop surface debris, then rinse filters 12 hours later. Phosphates may also be involved.

Persistent foam

Defoamer can treat foam, but it does not correct underlying water chemistry or phosphates.

Phosphates

Have a water sample tested; treat with No Phos if advised.

Cover care

Cover Restore cleans, polishes, and provides UV protection.

Optional maintenance

Spa Marvel and AquaFinesse are natural options available through Premium Wholesale. Ask our team how they fit your care routine.
Premium Wholesale Home & Leisure · 1-877-616-7727 · Based on “Spa Water Care Sheet 2026.” Follow chemical product labels and ask the store team for advice specific to your spa.

VIDEO GUIDES

Explore our video guides for step-by-step instructions on spa care, maintenance, troubleshooting, and everyday operation. These videos are designed to help you keep your spa running smoothly and performing at its best.